What it is:
It's an easy to use, completely nontoxic means of capturing and biodegrading the oil that leaks into a boats bilge and often escapes into the surrounding waters. The ingredients are 100% natural, biodegradable and nontoxic. The Completely natural product, housed in the BIO-SOKŪ, attracts microorganisms that love to eat oil and will turn mineral oil and/or fuels back into harmless substances found naturally in our environment.
Easy to install:
Most boats need only one BIO-SOKŪ to control oil and fuel spills for an *entire season. Boats over 40 feet may need two.
1) Tie the BIO-SOKŪ in the bilge where oil and water collect. Make sure it won't interfere with the bilge pump's operation
2) Let BIO-SOKŪ soak up the oil and odors, While you soak up the sun. There is no need to remove the BIO-SOKŪ until it has completely biodegraded itself and it is nothing more then an "empty Sock"
3) When it is empty, simply remove the BIO-SOKŪ from the bilge and dispose of it properly
* Entire season is referenced to be 4 - 6 months.
Economical:
Low Daily Cost! Less Than Ģ0.13/Day for a 6-Month Service Life!
Benefits:
Dependent on the type and amount of contaminants, the BIO-SOKŪ will last an entire season and will work constantly to help eliminate the possibility of fines for putting oil and fuel into the surrounding waters.
BIO-SOKŪ SPECIFICATIONS
Outside diameter: 7.5cm
Length: 25cm
Net weight: 250grams
Number per shipping case: 24
Active material:
PRPŪ Oil BusterTM. Ingredients are 100% natural, biodegradable and nontoxic. All ingredients are contained in a white fabric.
Absorption rate:
Dependent upon the specific contaminants, a half-pound BIO-SOKŪ will continually absorb 3/4 LB to 1.0 pound of that contaminant until fully depleted.
Waste disposal method:
If unused, BIO-SOKŪ is not a hazard. If saturated, BIO-SOKŪ can simply be left in place until the oil biodegrades. If removal is preferred, dispose of the BIO-SOKŪ in accordance with federal, state and local regulations.
This Product Does Not Contain any ingredient which is subject to the reporting requirements of Section 313 of SARA and its regulations or any component defined as hazardous under 40 CFR 261.24. PRPŪ Oil BusterTM (the powder contained in the BIO-SOKŪ) is a sorbent material and consists solely of the materials listed in section 300.915(g)(1) of the NCP.
BIO-SOKŪ a registered trademark
The innovative development of the following unique products gives customers an effective way to handle most hydrocarbon spills in a variety of applications. These products are manufactured at the Universal Remediation's plant in Pittsburgh PA.
It's an easy to use, completely nontoxic means of capturing and biodegrading the oil that leaks into a boats bilge and often escapes into the surrounding waters. The ingredients are 100% natural, biodegradable and nontoxic. The Completely natural product, housed in the BIO-SOKŪ, attracts microorganisms that love to eat oil and will turn mineral oil and/or fuels back into harmless substances found naturally in our environment.
Easy to install:
Most boats need only one BIO-SOKŪ to control oil and fuel spills for an *entire season. Boats over 40 feet may need two.
1) Tie the BIO-SOKŪ in the bilge where oil and water collect. Make sure it won't interfere with the bilge pump's operation
2) Let BIO-SOKŪ soak up the oil and odors, While you soak up the sun. There is no need to remove the BIO-SOKŪ until it has completely biodegraded itself and it is nothing more then an "empty Sock"
3) When it is empty, simply remove the BIO-SOKŪ from the bilge and dispose of it properly
* Entire season is referenced to be 4 - 6 months.
Economical:
Low Daily Cost! Less Than Ģ0.13/Day for a 6-Month Service Life!
Benefits:
- - Ensures Boat Owners of a clean, odor-free bilge!
- - No nasty smells or dangerous fumes!
- - Environmentally safe bilge water discharge (without any additional work once installed!)
Dependent on the type and amount of contaminants, the BIO-SOKŪ will last an entire season and will work constantly to help eliminate the possibility of fines for putting oil and fuel into the surrounding waters.
BIO-SOKŪ SPECIFICATIONS
Outside diameter: 7.5cm
Length: 25cm
Net weight: 250grams
Number per shipping case: 24
Active material:
PRPŪ Oil BusterTM. Ingredients are 100% natural, biodegradable and nontoxic. All ingredients are contained in a white fabric.
Absorption rate:
Dependent upon the specific contaminants, a half-pound BIO-SOKŪ will continually absorb 3/4 LB to 1.0 pound of that contaminant until fully depleted.
Waste disposal method:
If unused, BIO-SOKŪ is not a hazard. If saturated, BIO-SOKŪ can simply be left in place until the oil biodegrades. If removal is preferred, dispose of the BIO-SOKŪ in accordance with federal, state and local regulations.
This Product Does Not Contain any ingredient which is subject to the reporting requirements of Section 313 of SARA and its regulations or any component defined as hazardous under 40 CFR 261.24. PRPŪ Oil BusterTM (the powder contained in the BIO-SOKŪ) is a sorbent material and consists solely of the materials listed in section 300.915(g)(1) of the NCP.
BIO-SOKŪ a registered trademark
The innovative development of the following unique products gives customers an effective way to handle most hydrocarbon spills in a variety of applications. These products are manufactured at the Universal Remediation's plant in Pittsburgh PA.